| |
|
 |
Compact
Joint |
|
This joint is ideal for
use as a cable chamber, track or spur joint due to its capacity and
compact size. It has a maximum splicing capacity of 144-fibres, which
equates to 12 fibres on each of the factory fitted splice trays. The
joint base has six 22mm ports, allowing up to six cables to be spliced
together. |
|
|
|
| |
|
|
Aerial
Compact Joint |
This product is identical
to the Compact Joint (above) except it is supplied with a bracket for
mounting on to poles for aerial network installations.
|
|
|
|
|
| |
|
|
Compact
Node |
For ready access
applications in the external optical fibre network where Sirocco blown
fibre cables are spliced (to traditional or blown fibre cables). The
joint is fitted with a pressure relief valve, to prevent accidental
pressurisation during blown fibre installation. It is supplied with 12
single circuit splice trays and sufficient components for installing one
cable, enabling the breakout of up to 24 fibres (dual fibre circuits) to
customer drop cables. Blown fibre distribution cables can be installed
using OAsys blown fibre cable entry kits.
|
|
|
|
|
| |
|
|
Splitter
Compact Joint |
This product has been
designed specifically for FTTp PON network architectures. The product
houses up to four OAsys 1x8 Splitter Assemblies which enables cables (or
blown fibre tube) to be installed and spliced to splitters for the
distribution of up to 32 customers on a single fibre per customer basis.
It is supplied with a 1x8 Splitter Assembly pre-installed and sufficient
components for the installation of one input cable. Expansion product
are then available to allow up to four splitter assemblies to be
inserted into the joint.
|
 |
|
|
|
| |
|
|
Generic
Straight Joint |
U sed for "easy access"
applications within the external optical fibre network or at the
interface with the exchange/central office, allowing two loose tube
cables to be spliced together. The majority of optical cable
constructions can be accommodated. OAsys splicing modules are
pre-fitted, accommodating up to 12 spliced fibres per tray. The joint
can be upgraded to include additional cables and splices using OAsys
joint upgrade kits.
|
 |
|
|
|
| |
|
|
Generic
Loop Joint |
|
Allows a continuous loop
of optical loose tube elements from a cable mid section to be stored
within the joint closure for later breakout of fibres to connect to
customer drop cables. This is achieved using OAsys joint upgrade kits
and OAsys accessories. The unused elements are stored in a loop manager,
avoiding splicing but allowing easy access to all elements. |
|
|
|
|
| |
|
|
Generic
Blown Fibre Joint |
|
A joint used where blown
fibre cables are installed and need to be spliced. It is fitted with a
pressure relief valve to prevent accidental pressurisation of a sealed
closure during blown fibre installation. The joint is supplied without
splice trays and accessories, and can be configured using an OAsys joint
upgrade kits, general accessories and blown fibre accessories. |
 |
|
|
|
| |
|
|
ESDF4
In-Line Joint |
|
An underground joint
suitable for direct burial and underground chamber applications. It is
used for jointing and branching optical cables, having a total capacity
of 72 fibres. The joint is supplied with six splice trays (each managing
up to 12 fibre splices). Cable entry glands, splice protectors and
mounting brackets are ordered separately to suit the application
requirements. |
|
|
|
| |
|
|
ESMF7
Mechanical Seal Joint |
|
Used for straight, branch
and loop applications, available in a variety of sizes and
configurations to suit the application requirements. Two cap sizes are
available to maximize space utilisation (small cap for lower fibre count
configurations, greater capacity using the larger cap). |
 |
|
|
| |